Online Help

Products

    Pages

        Master Photo: AMP-X50MP, Front Plate
        Add to Favorites

        AMP-X50MP

        X Series Media Presentation Amplifier

        A compact, efficient stereo amplifier for media presentation systems. 

        Have a question?
        Add to a Project
        Find a Dealer

        The Crestron® AMP-X50MP is a low-cost audio amplifier solution that is suitable for a variety of applications. It features a compact, surface‑mountable design that installs virtually anywhere without requiring an equipment rack.

        LoZ (4/8 Ω) and Hi-Z (70V or 100V) Output
        High-efficiency Class D circuitry delivers 25 W per channel to drive one pair of 4 or 8 Ohm speakers, making it ideal to support stereo speakers at the front of a room or mono speakers in the ceiling. The amplifier can also be used with Hi-Z (70/100V) speakers, delivering 50 W.

        Convection Cooling
        The efficient design provides cool running operation to ensure long term reliability. The AMP-X50MP is high-density stackable with other Crestron X Series and Modular Amplifiers, allowing multiple units to be installed vertically in an equipment rack without needing extra ventilation space.

        Easy Installation
        Installation and setup of the AMP-X50MP is simple. Detachable connectors facilitate the termination of wiring. Balanced and unbalanced inputs can connect directly to the line output of a video projector or display, audio processor, mixer, or AV switcher. Independent controls for volume, bass, and treble allow a custom sound in any location. A knob cover is included with the product to protect against accidental changes to the front panel settings.

        Fully Protected
        The AMP-X50MP features protection against overheating, shorted or overloaded speaker lines, excessive input signals, and other faults. In the case of a shorted speaker line, both outputs mute automatically until the fault condition is resolved.

        ENERGY STAR® Certified
        An energy-efficient design enables the AMP-X50MP to meet demanding ENERGY STAR requirements. In addition to its high efficiency operation, the AMP-X50MP powers down automatically when no input signal is detected for more than 25 minutes, reducing overall power consumption and heat as part of an Energy Star® compliant system design. The amplifier quickly powers back on the instant an input signal is detected. A remote input can connect to a contact closure to place the amplifier in standby mode.

         
        Key Features
        • Compact and versatile power amplifier
        • 2 x 25 W per channel (1 x 50 W) into 4 or 8 Ohm speakers
        • 1 x 50 W output for Hi-Z (70V and 100V) speakers
        • Balanced, unbalanced, and stereo 3.5 mm inputs with auto summing
        • Stereo or mono-summed operation
        • Remote power control
        • Energy saving design reduces power consumption when idle
        • Highly sensitive audio-sensing circuitry with high-speed wake time
        • Convection cooled for noiseless operation
        • Volume, bass, and treble adjustments
        • Knob cover protects accidental changes to the device settings
        • Captive speaker and power connectors for secure and robust connectivity
        • Electronic short-circuit and overload protection
        • Factory installed surface mount flange brackets are removable and reversible
        • Quarter-Rack width for rack mounting with optional kit
        • 60 W DC power supply with locking barrel connector and DC cable included

        Note: All nominal specs, +/-10%

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

        This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. ENERGY STAR is either a trademark or registered trademark of the United States Environmental Protection Agency in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2021 Crestron Electronics, Inc.

         
        Audio
        Input Signal Types Balanced or unbalanced analog line-level
        Output Power
         
        Mode 1 Channel Driven 2 Channels Driven
        LoZ 8 ohm: 25 W
        4 ohm: 50 W        		 8 ohm: 25 W
        4 ohm: 25 W
        Hi-Z 70V 50 W N/A
        Hi-Z 100V 50 W N/A
        Frequency Response LoZ (4-8 Ohms): 20 Hz to 20kHz
        +/-0.5 dB at 1 W;
        Hi-Z (70V/100V): 90 Hz to 20kHz
        +/-3 dB at 1 W;
        HPF @ 80 Hz (+/-10 Hz),
        -12 dB/Octave
        THD+N < 0.1 % at 1kHz @ -3 dB full rated output power
        S/N Ratio > 90 dBA, 20 Hz to 20kHz, balanced, Hi-Z
        Crosstalk -75 dB at 1 kHz
        Input Sensitivity 1.23Vrms, +4 dBu balanced;
        0.316Vrms, -10 dBV unbalanced;
        For 25 W @ 8 Ohms
        50 W @ 70V/100V
        Gain 21.5 dB @ 8 Ohms, Balanced
        Wake Signal Threshold -57 dBu (1 mV) max
        Protection Clip limiter, over current, under voltage, over temperature, DC offset, extreme high frequency
        Click here to search product certificates.

        Note: All nominal specs, +/-10%

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

        This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. ENERGY STAR is either a trademark or registered trademark of the United States Environmental Protection Agency in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2021 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.