Control Port Expansion Module
An outboard module for adding control ports to a Crestron® touch screen control system or any other Crestron control systems.
The C2N-IO is a very compact device that adds control ports to any Crestron® 2-Series or 3-Series® control system. It connects via the Cresnet® control network and provides one RS-232, one IR, and two relay control ports.[1] It can be mounted to any flat surface using two screws or adhesive reclosable fastener (3M® Dual Lock® included).
The C2N-IO is ideally designed for use with a Crestron touch screen control system ( TPCS-4SM, TPCS-4SMD, or TSCW-730), providing an advanced wall mount control package that fits in a 2-gang US or UK electrical box. The C2N-IO can be mounted inside the electrical box behind the touch screen, or it can be installed remotely requiring just one Cresnet control cable for power and communications.
Key Features
- Fits within a 2-gang wall box behind the TPCS-4SM(D) or TSCW-730
- Provides 1 RS-232, 1 IR/serial, and 2 relay ports [1]
- Compatible with any Crestron® 2-Series or 3-Series® control system
- Interfaces via the Cresnet® control bus
- 24 Volt DC Cresnet powered
- Surface mount bracket included
| Communications |
| |
Cresnet® |
Cresnet slave device, 2-Series and 3-Series® compatible |
| |
RS-232 |
Supports 2-way device control and monitoring up to 115.2k baud with software handshaking [1] |
| |
IR/Serial |
Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud |
| Connectors |
| |
RELAY 1 – 2 |
(1) 4-pin captive screw terminal block comprising (2) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
Solid-state arc suppression across contacts |
| |
COM |
(1) 3-pin captive screw terminal block, bidirectional RS-232 port [1];
Up to 115.2k baud; software handshaking support |
| |
IR |
(1) 2-pin captive screw terminal block, IR/Serial output port;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud |
| |
NET |
(2) 4-pin captive screw terminal blocks;
Cresnet slave ports, paralleled |
| Controls & Indicators |
| |
NET ID |
(2) Rotary switches for manually setting Cresnet ID;
'00' setting enables touch-settable ID (TSID) |
| |
PWR |
(1) Green LED, indicates operating power supplied via Cresnet control network |
| |
NET |
(1) Amber LED, indicates communication with Cresnet system |
| |
SETUP |
(1) Red LED and (1) recessed miniature pushbutton for TSID |
| Power Requirements |
| |
Cresnet Power Usage |
2.5 Watts (105 mA @ 24 Volts DC) |
| Environmental |
| |
Temperature |
32° to 104° F (0° to 40° C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| |
Heat Dissipation |
3.5 BTU/hr |
| Enclosure |
| |
Metal, freestanding or surface mount, surface mount bracket and 3M® Dual Lock® reclosable fastener included, fits inside a 2-gang electrical box or 2-gang UK (BS 4662) electrical box, 1.38 in (35 mm) minimum internal box depth required for C2N-IO and TPCS-4SM(D) or TSCW-730 combined |
| Dimensions |
| |
Height |
2.25 in (58 mm) |
| |
Width |
3.50 in (89 mm), 4.38 in (112 mm) with bracket |
| |
Depth |
0.83 in (21 mm) |
| Weight |
| |
2.7 oz (75 g) |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.