Online Help

Products

    Pages

        Master Photo: HD-MD-4K-200-1G-W: Front
        Add to Favorites

        HD-MD-4K-200-1G-W KIT

        4K 2x1 Scaling Auto-Switcher and DM Lite® Wall Plate Extender, White, over CATx Cable

        Provides a cost-effective high-definition AV presentation solution for classrooms and meeting spaces. Consists of a white 1-gang wall plate transmitter (HD-TX-101-C-1G-E Series) and a surface-mountable receiver (HD-RX-4K-210-C-E) that enable AV switching, scaling, and signal extension over a single CATx cable for up to 230 ft (70 m). Provides a single HDMI® input on the transmitter and an additional HDMI input on the receiver. 4K scaling HDMI output ensures a reliable, high-quality video image. Supports 4K60 4:2:0 video.

        Have a question?
        Add to a Project
        Find a Dealer

        The Crestron® HD-MD-4K-200-1G provides a cost-effective multimedia presentation solution for classrooms and meeting spaces. Consisting of a wall plate transmitter (HD-TX-101-C-1G-E Series) and surface-mountable receiver (HD-RX-4K-210-C-E), the HD-MD-4K-200-1G extends an HDMI® signal over a CATx (CAT5e or higher) twisted pair cable. For resolutions up to 2K, the maximum transmission distance is 230 ft (70 m). For higher resolutions up to 4K, the maximum transmission distance is 130 ft (40 m).1

        NOTE: Power is transmitted over the CATx cable that connects the transmitter to the receiver.

        The transmitter provides one HDMI input. The receiver provides an additional HDMI input that can be connected to a local AV source or to an optional Crestron media presentation wall plate (MP-WP152, sold separately).

        The HD-MD-4K-200-1G is available in two models: HD-MD-4K-200-1G-W and HD-MD-4K-200-1G-B. The HD-MD-4K-200-1G-W includes a white HD-TX-101-C-1G-E Series wall plate transmitter. The HD-MD-4K-200-1G-B includes a black HD-TX-101-C-1G-E Series wall plate transmitter.

        Automatic Switching of Inputs
        Automatic switching between the HDMI input on the transmitter and the HDMI input on the receiver can occur based on the last connected input or on the routing priority assigned to each input. Switching behavior is configurable using the web interface or programmable using a Crestron control system. In addition to automatic switching, input selection push buttons on the receiver enable the desired input to be selected manually.

        HDMI Output with 4K Scaler
        A single HDMI output with a built-in scaler connects the receiver to a display or other device with an HDMI input. Input resolutions are automatically scaled to match the native resolution of the display device, resulting in optimal image quality. For applications requiring comprehensive EDID management, the web interface can be used to ensure that every input is displayed at its optimal resolution and format. Input resolutions up to 4K60 4:2:0 are supported.

        Audio De-embedding
        The analog audio output on the receiver enables the HD-MD-4K-200-1G to extract the stereo audio signal from digital sources to feed a sound bar, amplified speakers, or a separate sound system. The analog audio output is active only when the input is receiving a 2-channel stereo signal.

        Device Control
        Equipped with onboard control ports, the receiver can control various devices in a room. The COM (RS-232) port and CEC over the HDMI output can enable the display device to be turned on or off automatically without the use of a control system. With the use of a control system, the IR port can also control the display device. Two relay ports are provided for controlling a projection screen and other low-voltage contact closure activated equipment. Two Versiport I/O ports enable the integration of devices such as power sensors and motion detectors. An Ethernet port connection to a LAN also provides control by enabling use of the built-in web interface as well as connection to a control system.

        NOTE: The COM, IR, and Ethernet ports cannot be used to extend signals over the CATx cable connection between the receiver and the transmitter.

        USB Power Port
        A USB power port is included on the transmitter to power USB powered devices (500 mA maximum).

        NOTE: No USB data is passed through the USB power port. The port cannot be used to extend USB data, video, or audio signals.

        .AV Framework™ Technology Support
        In addition to a built-in web interface and control system programming, the built-in .AV Framework technology of the MPC3-201 and MPC3-302 control systems can be used to control the HD-RX-4K-210-C-E as a switcher. (For information about .AV Framework technology, visit www.crestron.com/avframework.)

        XiO Cloud® Service Support
        The HD-MD-4K-200-1G is compatible with the XiO Cloud service, which is an IoT (Internet of Things) platform for remotely provisioning, monitoring, and managing Crestron devices across an enterprise or an entire client base. Built on the Microsoft® Azure® software platform and using industry-leading Azure IoT Hub technology, the XiO Cloud service enables installers and IT managers to deploy and manage thousands of devices in the amount of time it previously took to manage a single device. Unlike other virtual machine-based cloud solutions, Azure services provide unlimited scalability to suit the ever-growing needs of an enterprise. For more information, visit www.crestron.com/xiocloud.

        Native Integration with Cisco Webex® and Touch 10 Devices
        Native integration of the Cisco API enables source inputs of the HD-RX-4K-210-C-E to be added to  a compatible Cisco Webex video conference system that is controlled by a Cisco Touch 10 control unit. Eliminating the need for control system programming, integration with Cisco® devices is accomplished by using the Crestron Configuration tool, which is hosted on the Crestron website at configuration.crestron.com. Configuration includes the selection of the desired Crestron and Cisco hardware models and the assignment of HD-RX-4K-210-C-E input names and icons for use on the Cisco Touch 10 screen. The resulting configuration file is then downloaded from the website and loaded to the HD-RX-4K-210-C-E using the HD-RX-4K-210-C-E web interface. Communication is established between the HD-RX-4K-210-C-E and Cisco devices, enabling the Cisco Touch 10 to display and control the additional HD-RX-4K-210-C-E inputs.

         
        Key Features
        • 4K60 4:2:0 capability
        • 1-gang wall plate transmitter and surface-mountable receiver with 2x1 AV switching, scaling, and signal extension functionality
        • One HDMI® input on transmitter and one HDMI input on receiver
        • One 4K scaling HDMI output on receiver
        • Automatic switching of inputs
        • Signal extension of video, audio, and power over a CATx cable—up to 230 ft (70 m) for resolutions up to 2K or up to 130 ft (40 m) for higher resolutions up to 4K
        • EDID management
        • HDCP 2.2 management
        • Stereo audio de-embedding via the analog audio output
        • IR, RS-232, relay, and I/O control ports
        • CEC (Consumer Electronics Control) capability
        • Gigabit Ethernet connectivity
        • USB power port
        • Built-in web interface for easy configuration and monitoring
        • Compatibility with Crestron® 3-Series® or later control systems
        • .AV Framework™ technology support
        • Crestron XiO Cloud™ service support
        • Native Integration with Cisco Webex® and Touch 10 devices
        • Low-profile installation
        • White wall plate transmitter (decorator style faceplate sold separately)
        • 100-240 VAC power pack included
        1. For the DM Lite CATx cable connection, use Crestron DM-CBL-8G, Crestron DM-CBL-ULTRA, or third-party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Wire and cables are sold separately. DM Lite ports are not compatible with DigitalMedia 8G+®, HDBaseT®, PoE, or PoDM technology or any other type of CATx based interface or network.
        2. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HDI-DVI interface cables are available separately.
        3. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HDI-DVI interface cables are available separately.

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

        This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, .AV Framework, 3‑Series, AirMedia, Auto-Locking, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM Lite, QuickSwitch HD, Saros. and XiO Cloud are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Cisco and Cisco Webex are either trademarks or registered trademarks of Cisco Technology, Inc. in the United States and/or other countries. HDBaseT is either a trademark or registered trademark of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Microsoft and Azure are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2021 Crestron Electronics, Inc.

         
        Video
        Switcher 2x1 (1 input at transmitter plus 1 input at receiver x 1 output at receiver) auto-switching or manual, audio-follows-video, Crestron Auto-Locking® and QuickSwitch HD™ technology
        Scaler, HDMI Output 4K video scaler with intelligent frame rate conversion, Deep Color support, content adaptive noise reduction, 3:2/2:2 pull-down detection and recovery
        Input Signal Types HDMI with Deep Color and 4K (DVI and Dual-Mode DisplayPort™ interface compatible2)
        Output Signal Types HDMI with Deep Color and 4K (DVI compatible3)
        Copy Protection HDCP 2.2
        Maximum Resolutions Common resolutions are listed in the following table.
        Scan Type Resolution Frame Rate Color Sampling Color Depth
        Progressive 4096x2160
        DCI 4K and
        3840x2160
        4K UHD        		 24 Hz 4:4:4 30 bit
        30 Hz 4:4:4 24 bit
        30 Hz 4:2:2 36 bit
        60 Hz 4:2:0 24 bit
        2560x1600
        WQXGA        		 60 Hz 4:4:4 36 bit
        1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
        NOTES:
        • Common resolutions are supported at pixel clock rates up to 300 MHz.
        • Interlaced video sources are not supported.
        Scaler Resolutions, HDMI Output Auto (EDID preferred)
        1280x720p@50Hz (720p50)
        1280x720p@60Hz (720p60)
        1920x1080i@25Hz (1080i25)
        1920x1080i@30Hz (1080i30)
        1920x1080p@30Hz (1080p30)
        1920x1080p@25Hz (1080p25)
        1920x1080p@24Hz (1080p24)
        1920x1080p@50Hz (1080p50)
        1920x1080p@60Hz (1080p60)        		 3840x2160p@24Hz
        3840x2160p@25Hz
        3840x2160p@30Hz
        4096x2160p@24Hz
        4096x2160p@25Hz
        4096x2160p@30Hz
        3840x2160p@50Hz
        3840x2160p@60Hz
        4096x2160p@50Hz
        4096x2160p@60Hz
        Audio
        Input Signal Types HDMI (Dual-Mode DisplayPort interface compatible2)
        Output Signal Types HDMI, analog stereo
        Digital Formats 2-channel LPCM
        Analog Formats Stereo 2-channel
        Digital-To-Analog Conversion 24-bit 48 kHz
        Output Impedance 200 ohms balanced, 100 ohms unbalanced
        Maximum Output Level 4 Vrms balanced, 2 Vrms unbalanced
        Output Volume -80 to +20 dB level adjustment range, plus Mute
        Mute Enable or disable independently for HDMI and analog audio output
        Analog Output Performance Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
        S/N Ratio: >95 dB @ 10 dBV, 20 Hz to 20 kHz, A-weighted
        THD+N: <0.005% @ 1 kHz and 10 dBV
        Stereo Separation: 20 Hz to 20 kHz ≤80 dB
        Acoustic Noise Not applicable (fanless)
        Communications
        Ethernet 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, CIP, DHCP, web browser setup and control
        RS-232 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
        IR 1-way device control via infrared up to 60 kHz
        HDMI HDCP 2.2, EDID, CEC
        DM Lite HDCP 2.2, EDID
        Connectors – Transmitter (HD-TX-101-C-1G-E)
        HDMI IN (1) HDMI Type A connectors, female;
        HDMI digital video/audio input (DVI and Dual-Mode DisplayPort interface compatible2)
        POWER ONLY (1) USB Type A connector, female;
        USB power port (500 mA maximum output);
        Supplies power to a USB powered device
        TO RX (DM Lite, Rear) (1) 8-pin RJ-45 connector, female, shielded;
        DM Lite® link port for connection to the HD-RX-4K-210-C-E receiver1
        24 VDC 1.25A (Rear) (1) 2-pin 3.5 mm detachable terminal block;
        Not used

        NOTE: The power pack included with and connected to the HD-RX-4K-210-C-E receiver can be used to power both the transmitter and receiver. A power pack must not be connected to both devices simultaneously.
        Connectors - Receiver (HD-RX-4K-210-C-E)
        HDMI INPUT 1 (1) HDMI Type A connector, female;
        HDMI digital video/audio input (DVI and Dual-Mode DisplayPort interface compatible2)
        DM Lite INPUT 2 (1) 8-pin RJ-45 yellow connector, female, shielded;
        DM Lite link port for connection to the HD-TX-101-C-1G-E transmitter1
        HDMI OUTPUT (1) HDMI Type A connector, female;
        HDMI digital video/audio output (DVI compatible3)

        NOTE: CEC over the HDMI output provides Power On/Off control of the display device without a control system or full programmable control of any device with a control system.
        AUDIO L/R (1) 5-pin 3.5 mm detachable terminal block;
        Balanced/unbalanced stereo line-level audio output;
        Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced;
        Output Impedance: 200 ohms balanced, 100 ohms unbalanced
        Ethernet (1) 8-pin RJ-45 connector, female;
        100BASE-TX/1000BASE-T Ethernet port
        I/O 1-2 (2) 2-pin detachable terminal blocks;
        Comprised of 2 Versiport digital input/output or analog input ports (referenced to GND);
        Digital Input: Rated to 0-24 VDC, input impedance 20k ohms, logic threshold >3.125 V low/0 and <1.875 V high/1;
        Digital Output: 250 mA sink from maximum 24 VDC, catch diodes for use with real world loads;
        Analog Input: Rated for 0-10 VDC, protected to 24 VDC maximum, input impedance 21k ohms with pull-up resistor disabled;
        Programmable 5 V, 2k ohms pull-up resistor per pin
        RELAY 1-2 (2) 2-pin detachable terminal blocks;
        Comprised of 2 normally open, isolated relays;
        Rated 1 A, 30 VAC/VDC;
        MOV arc suppression across contacts
        IR (1) 2-pin 3.5 mm detachable terminal block;
        IR output control port;
        Supports IR up to 60 kHz;
        IRP2 emitter sold separately

        NOTE: The IR port provides Power On/Off control of the display device with the use of a control system.
        COM (1) 5-pin 3.5 mm detachable terminal block;
        Bidirectional RS-232 port;
        Supports RS-232 up to 115.2k baud with hardware and software handshaking

        NOTE: The COM port provides Power On/Off control of the display device without a control system or full programmable control of any device with a control system.
        24V 1.25A (1) 2.1 x 5.5 mm DC power connector;
        24 VDC power input;
        PW-2412WU power pack included

        NOTE: The power pack powers both the HD-RX-4K-210-C-E receiver and the HD-TX-101-C-1G-E transmitter. A power pack must not be connected to both devices simultaneously.
        SERVICE (1) USB Type A connector, female;
        For factory use only
        Transmitter (HD-TX-101-C-1G-E)
        PWR (1) Green LED, indicates that power is being applied to the HD-TX-101-C-1G-E from the power pack connected to the HD-RX-4K-210-C-E receiver
        HDMI IN (1) Green LED, indicates HDMI input signal presence
        TO RX (2) LEDs on RJ-45 connector. Green LED indicates DM Lite link status. Amber LED indicates a valid video signal.
        Controls and Indicators - Receiver (HD-RX-4K-210-C-E)
        PWR (1) LED, indicates that power is being applied to the HD-RX-4K-210-C-E from the power pack connected to the receiver. Amber indicates that the HD-RX-4K-210-C-E is booting. Green indicates that the HD-RX-4K-210-C-E is operational.
        INPUT 1 – 2 (2) Push buttons for manual input selection and (2) LEDs. Green indicates that video is switched. Amber indicates that video is detected but is not switched.
        AUTO (1) Push button to enable or disable automatic switching and (1) green LED to indicate that automatic switching is enabled
        SETUP (1) Red LED and (1) push button for display of IP address on the HDMI output
        DM Lite (2) LEDs on RJ-45 connector. Green indicates that a DM Lite link is established. Flashing amber indicates non-HDCP video, and solid amber indicates HDCP video.
        Ethernet (2) LEDs on RJ-45 connector. Green indicates that an Ethernet link is established. Flashing amber indicates Ethernet activity.
        Power
        Power Pack
        (Included with Receiver)        		 Input: 100-240 VAC, 50/60 Hz
        Output: 1.25 A @ 24 VDC
        Model: PW-2412WU

        NOTE: The power pack connects to the HD-RX-4K-210-C-E receiver and powers both the receiver and the transmitter. A power pack must not be connected to both devices simultaneously.
        Power Consumption 14.8 W typical
        Environmental
        Temperature 32° to 104° F (0° to 40° C)
        Humidity Transmitter: 20% to 90% RH (non-condensing);
        Receiver: 10% to 90% RH (non-condensing)
        Heat Dissipation 50.5 BTU/hr
        Construction - Transmitter (HD-TX-101-C-1G-E)
        Composition Metal housing and bracket with white polycarbonate front label overlay
        Mounting Mounts in a 1-gang 2-1/4 in. (57 mm) deep U.S. electrical box or plaster ring (not included)
        Faceplate Requires a decorator style faceplate (Crestron FP-G1 series or larger, sold separately)
        Enclosure - HD-RX-4K-210-C-E
        Chassis Metal, black finish, vented sides, 2 mounting flanges attached
        Mounting Surface or rack rail mount
        Dimensions - Transmitter (HD-TX-101-C-1G-E)
        Height 4.08 in. (104 mm)
        Width 1.81 in. (46 mm)
        Depth 1.97 in. (50 mm)
        Dimensions - Receiver (HD-RX-4K-210-C-E)
        Height 5.11 in. (130 mm)
        Width 10.53 in. (268 mm) with mounting flanges attached
        Depth 1.10 in. (28 mm)
        Weight
        Transmitter 5.30 oz (150 g)
        Receiver 2.3 lb (1.05 kg)
        Compliance
        UL® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device
        Click here to search product certificates.
        1. For the DM Lite CATx cable connection, use Crestron DM-CBL-8G, Crestron DM-CBL-ULTRA, or third-party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Wire and cables are sold separately. DM Lite ports are not compatible with DigitalMedia 8G+®, HDBaseT®, PoE, or PoDM technology or any other type of CATx based interface or network.
        2. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HDI-DVI interface cables are available separately.
        3. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HDI-DVI interface cables are available separately.

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

        This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, .AV Framework, 3‑Series, AirMedia, Auto-Locking, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM Lite, QuickSwitch HD, Saros. and XiO Cloud are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Cisco and Cisco Webex are either trademarks or registered trademarks of Cisco Technology, Inc. in the United States and/or other countries. HDBaseT is either a trademark or registered trademark of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Microsoft and Azure are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2021 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.