Online Help

Products

    Pages

        Master Photo: HD-MD4X1-4KZ-E: Front, Angle View
        Add to Favorites

        HD-MD4X1-4KZ-E

        4x1 4K60 4:4:4 HDR AV Switcher

        A high-performance 4K60 4:4:4 AV switcher. Provides four HDMI® inputs and one HDMI output. Includes support of HDR (High Dynamic Range) and Dolby Vision® video formats, automatic switching of HDMI inputs, advanced EDID management, native Crestron® control via Ethernet, XiO Cloud® connectivity, and enterprise-grade security.
        Have a question?
        Add to a Project
        Find a Dealer

        The HD-MD4X1-4KZ-E is a 4K60 4:4:4 HDR (High Dynamic Range) AV switcher that provides a cost-effective solution for professional AV applications. Equipped with four HDMI® inputs and one HDMI output, the HD-MD4X1-4KZ-E includes features such as automatic switching of inputs, EDID management, HDCP 2.3 compliance, enterprise-grade security, and XiO Cloud® service support.

        4K60 4:4:4 and HDR Support
        The HD-MD4X1-4KZ-E supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.

        Automatic Switching of Inputs
        Automatic switching among the HDMI inputs can occur based on the last connected input or on the routing priority assigned to each input.

        Switching behavior is configurable using the web interface or the XiO Cloud® service and is programmable using a Crestron control system. In addition, input selection push buttons on the front panel of the HD-MD4X1-4KZ-E enable the desired inputs to be selected manually.

        EDID Management
        The HD-MD4X1-4KZ-E provides comprehensive management of EDID (Extended Display Identification Data) to ensure that every source is displayed at the optimal resolution and format. For applications requiring a custom configuration, the HD-MD4X1-4KZ-E enables assessment of the format and resolution capabilities of any device that is connected to the HDMI output of the switcher. The HD-MD4X1-4KZ-E provides the ability to configure signals appropriately for the most desirable and predictable behavior.

        HDMI Audio De-embedding
        Embedded HDMI 2-channel LPCM audio can be extracted from the selected HDMI input and transmitted to the AUX stereo audio output. Volume and mute control are configurable for the HDMI output and AUX audio output.

        Device Control via CEC
        Under the management of a control system, CEC (Consumer Electronics Control) over the HDMI connections can control the source and display devices, potentially eliminating the need for dedicated serial cables or IR emitters. CEC over the HDMI output can also enable the display device to be turned on or off automatically without the use of a control system.

        Enterprise-Grade Security
        The HD-MD4X1-4KZ-E includes advanced security features and protocols. Using 802.1X authentication, Active Directory® credential management, PKI authentication, TLS, SSH, and HTTPS, the HD-MD4X1-4KZ-E provides a true enterprise-grade AV switcher.

        Built-In Web Interface
        Configuration of the HD-MD4X1-4KZ-E can be accomplished by using the built-in web interface. The configuration of a single unit can be downloaded to a computer or mobile device and then uploaded to multiple HD-MD4X1-4KZ-E units to simplify system installation.

        .AV Framework™ Technology Support
        In addition to a built-in web interface and control system programming, built-in .AV Framework technology of a Crestron control system can be used to configure and control the HD-MD4X1-4KZ-E. For information about .AV Framework technology and the supported Crestron control systems, visit www.crestron.com/avframework.

        XiO Cloud® Service Support
        The HD-MD4X1-4KZ-E is compatible with the XiO Cloud service, which is an IoT (Internet of Things) platform for remotely provisioning, monitoring, and managing Crestron devices across an enterprise or an entire client base. Built on the Microsoft® Azure® software platform and using industry-leading Azure IoT Hub technology, the XiO Cloud service enables installers and IT managers to deploy and manage thousands of devices in the amount of time it previously took to manage a single device. Unlike other virtual machine-based cloud solutions, Azure services provide unlimited scalability to suit the ever-growing needs of an enterprise. For more information, visit www.crestron.com/xiocloud.

        Compact Surface-Mountable Design
        The HD-MD4X1-4KZ-E can be mounted to a wall or other flat surface. It can also be attached to a single rack rail.

         
        Key Features
        • 4K60 4:4:4 digital AV switcher
        • HDR10, HDR10+, and Dolby Vision® video formats
        • Four HDMI® inputs and one HDMI output
        • Automatic switching of inputs
        • EDID management
        • HDCP 2.3 compliance
        • HDMI audio de-embedding
        • Device control via CEC
        • Enterprise-grade security
        • Built-in web interface
        • Compatibility with Crestron® 3-Series® or later control systems
        • .AV Framework™ technology support
        • XiO Cloud® service support
        • Compact surface-mountable design
        • PoE powered device (optional power pack sold separately)
        1. 3D formats are not supported.
        2. 4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.
        3. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HDI-DVI interface cables are available separately.
        4. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HDI-DVI interface cables are available separately.
        5. In order for the LAN PoE port to receive PoE, the port must be connected to a PoE compliant Ethernet switch or to other equipment that has a PoE power sourcing equipment (PSE) port. Cabling that connects to a PoE PSE port is designed for intrabuilding use only.

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

        This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, .AV Framework, 3‑Series, and XiO Cloud are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, Dolby Digital, and Dolby Vision are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Microsoft, Active Directory, and Azure are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2020 Crestron Electronics, Inc.

         
        Crestron XiO Cloud Features
        Manage Firmware  
        Configure Settings  
        License Management N/A
        Remote Actions  
        Deploy Custom Programming N/A
        Live Status  
        Interactive Dashboard  
        Alerts  
        Detailed Features
        Learn More about XiO Cloud

         
        4K XiO Cloud HDMI
        Video
        Input Signal Types HDMI with HDR10, HDR10+, Dolby Vision, Deep Color, 4K60 4:4:4 support1, 2 (DVI and Dual-Mode DisplayPort™ interface compatible3)
        Output Signal Types HDMI with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support1, 2 (DVI compatible4)
        Switcher 4x1 digital AV switcher
        Copy Protection HDCP 2.3
        Maximum Resolutions Common resolutions are listed in the following table.
        Scan
        Type        		 Resolution Frame
        Rate        		 Color
        Sampling        		 Color
        Depth
        Progressive 4096x2160 DCI 4K
        and 3840x2160 4K UHD        		 24 Hz 4:4:4 36 bit
        30 Hz 4:4:4 36 bit
        60 Hz 4:2:2 36 bit
        60 Hz 4:4:4 24 bit
        2560x1600 WQXGA 60 Hz 4:4:4 36 bit
        1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
        Interlaced
        (Input Only)        		 1920x1080 HD 1080i 30 Hz 4:4:4 36 bit
        NOTE: Custom resolutions that do not exceed 4096 pixels in width and 2160 pixels in height are supported at pixel clock rates up to 600 MHz.
        Audio - General
        Digital-To-Analog Conversion 24-bit 48 kHz
        Frequency Response ±0.5 dB, 20 Hz to 20 kHz
        THD+N <0.005%, 1 kHz, 10 dBV
        S/N Ratio >95 dB, 10 dBV, 20 Hz to 20 KHz, A-weighted
        Crosstalk ≤90 dB, 1 KHz, for multiple inputs only
        Stereo Separation ≤80 dB, 20 Hz to 20 kHz
        Audio - Source Inputs
        Input Signal Type HDMI (Dual-Mode DisplayPort interface compatible3)
        Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
        Audio - Digital Output
        Output Signal Type HDMI
        Formats Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels
        Source -80 dB to +20 dB adjustment range, plus Mute
        Master Volume -80 dB to +20 dB adjustment range, plus Mute
        Audio - Analog Line Output
        Output Signal Type/Format Stereo 2-channel
        Volume Control -80 dB to +20 dB adjustment range, plus Mute, Mono, and Stereo
        Communications
        Ethernet 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, Web browser setup and control, Crestron control system integration, IEEE 802.1X, Secure CIP, Authentication, SSH/SSL, TLS
        USB For firmware loading and configuration management and to power a USB powered device
        HDMI HDCP 2.3, EDID, CEC
        Connectors
        HDMI IN 1-4 (4) 19-pin Type A connector, female;
        HDMI digital video/audio input (DVI and Dual-Mode DisplayPort interface compatible3)
        HDMI OUT (1) 19-pin Type A connector, female;
        HDMI digital video/audio output (DVI compatible4)
        AUDIO OUT, AUX (2) 5-pin 3.5 mm detachable terminal block;
        Balanced/unbalanced stereo line-level audio output;
        Output Impedance: <100 Ohms;
        Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
        LAN PoE (1) 8-pin RJ-45 connector, female;
        100BASE-TX/1000BASE-T Ethernet port;
        PoE (Power over Ethernet) powered device (PD) port;
        IEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95 W) compliant5
        24 VDC 0.75 A (1) 2.1 x 5.5 mm DC power connector;
        24 VDC power input;
        PW-2407WU power pack (sold separately)
        SERVICE (1) USB Type A female;
        For firmware loading and configuration management;
        Can also provide up to 5 V 500 mA power to a USB powered device
        G (1) 6-32 screw, chassis ground lug
        Controls and Indicators
        PWR (1) LED. Amber indicates that the device is booting. Green indicates that the device is operational.
        AUTO (1) Push button to enable or disable automatic switching and (1) green LED to indicate that automatic switching is enabled
        INPUT 1-4 (4) Push buttons for manual input selection and (4) LEDs. Green indicates that the corresponding input is routed to the output.
        Amber indicates that a source is detected at the corresponding input but is not routed to the output.
        SETUP (1) Red LED and (1) push button for display of IP address on connected HDMI output
        Ethernet (2) LEDs on RJ-45 LAN connector.
        Link status LED: Green indicates that a 100BASE-TX link is established. Amber indicates that a 1000BASE-T link is established.
        Ethernet activity LED: Flashing amber indicates Ethernet activity.
        Power
        PoE IEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95 W) compliant, capable of being powered by PoE power sourcing equipment (PSE)5
        Power Pack (Optional) 0.75 A @ 24 VDC;
        100-240 VAC, 50/60 Hz;
        Model: PW-2407WU (sold separately)
        Power Consumption 10 W typical
        Environmental
        Temperature 32° to 104° F (0° to 40° C)
        Humidity 10% to 90% RH (non-condensing)
        Heat Dissipation 33 BTU/hr typical
        Acoustic Noise Not applicable (fanless)
        Construction
        Chassis Metal, black finish, vented sides
        Mounting Surface-mountable or attachment to a single rack rail
        Dimensions
        Height 8.52 in. (217 mm)
        Width 7.0 in. (178 mm)
        Depth 1.34 in. (34 mm)
        Weight
        1.8 lb (0.82 kg)
        Compliance
        Regulatory Model M201946001
        Bureau Veritas Listed for US & Canada, IC, CE, FCC Part 15 Class B digital device
        Click here to search product certificates.
        1. 3D formats are not supported.
        2. 4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.
        3. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HDI-DVI interface cables are available separately.
        4. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HDI-DVI interface cables are available separately.
        5. In order for the LAN PoE port to receive PoE, the port must be connected to a PoE compliant Ethernet switch or to other equipment that has a PoE power sourcing equipment (PSE) port. Cabling that connects to a PoE PSE port is designed for intrabuilding use only.

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

        This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, .AV Framework, 3‑Series, and XiO Cloud are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, Dolby Digital, and Dolby Vision are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Microsoft, Active Directory, and Azure are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2020 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.