Online Help

Products

    Pages

        Master Photo: HD-RXCA-4KZ-101, Front Angle
        Add to Favorites

        HD-RXCA-4KZ-101

        DM Lite® 4K60 4:4:4 Receiver for HDMI®, RS-232, IR, and Analog Audio Signal Extension over CATx Cable

        Interoperability with a DM Lite® transmitter or DMPS Lite™ switcher to provide point-to-point extension of HDMI®, RS-232, IR, and analog audio signals over a CATx cable. Supports 4K60 4:4:4 video, HDR10+, and HDCP 2.3.

        Have a question?
        Add to a Project
        Find a Dealer

        The HD‑RXCA‑4KZ‑101 is a DM Lite® 4K60 4:4:4 receiver designed to interoperate with a DM Lite® transmitter or DMPS Lite™ switcher for the transmission of HDMI®, RS-232, IR, and analog audio signals. A CAT5e or higher twisted pair cable is used to connect the HD‑RXCA‑4KZ‑101 to the DM Lite transmitter or DMPS Lite switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.1

        Interoperability with a DM Lite Transmitter or DMPS Lite Switcher
        The DM Lite input port of the HD‑RXCA‑4KZ‑101 must be connected to a DM Lite output port of a DM Lite transmitter or DMPS Lite switcher. Examples of supported DM Lite 4K60 4:4:4 transmitters are the HD-TX-4KZ‑101, HD-TX-4KZ‑111, HD-TXA-4KZ‑101, HD-TXC-4KZ‑101, and HD-TXCA-4KZ‑101. Supported DM Lite 4K60 4:2:0 transmitters are the HD-TX-101‑C‑E, HD-TXC-101‑C‑E, HD-TX-301‑C‑E, HD-TX-101‑C‑1G‑E, HD-TXC-101‑C‑1G‑E, and HD-TX-201‑C‑2G‑E. Supported DMPS Lite switchers are the HD‑PS622, HD‑PS621, HD‑PS402, and HD‑PS401.

        The HD‑RXCA‑4KZ‑101 can be configured and controlled only when it is used with a DMPS Lite switcher. The web interface of the switcher can be used to configure the HD‑RXCA‑4KZ‑101. In addition, control system programming and .AV Framework™ software support of the HD‑RXCA‑4KZ‑101 is hosted by the switcher.

        4K60 4:4:4 and HDR Support
        The HD‑RXCA‑4KZ‑101 supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2

        Analog Audio De-Embedding
        The analog audio output port of the HD‑RXCA‑4KZ‑101 enables 2 channel LPCM audio to be extracted from the AV signal.

        S/PDIF Optical Digital Audio Return
        The S/PDIF optical digital audio input of the HD‑RXCA‑4KZ‑101 receives S/PDIF optical digital audio from a device (for example, a display). The S/PDIF optical digital audio output of the HD-TXCA-4KZ-101 then transmits the audio to an AV receiver. Supported S/PDIF digital audio formats are Dolby Digital®, Dolby Digital EX, DTS®, DTS ES, and LPCM up to 6 channels.

        Compact, Surface-Mountable Design
        Compact in design, the HD‑RXCA‑4KZ‑101 can be mounted onto a flat surface such a wall behind a flat-panel display or a ceiling above a projector. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD‑RXCA‑4KZ‑101 can receive power from the included power pack or from the remote DM Lite transmitter or DMPS Lite switcher.3

         
        Key Features
        • Interoperability with a DM Lite® transmitter or DMPS Lite™ switcher
        • Point-to-point extension of HDMI®, RS-232, IR, and analog audio signals over a CAT5e or higher cable
        • DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
        • 4K60 4:4:4 capability
        • HDR10, HDR10+, and Dolby Vision® video formats
        • Compliance with HDCP 2.3
        • Analog audio de-embedding
        • S/PDIF optical digital audio input for audio return to the HD‑TXCA‑4KZ‑101
        • CEC (Consumer Electronics Control) pass-through capability
        • Bidirectional RS-232 and IR pass-through capability
        • EDID pass-through capability
        • Compact, surface-mountable design
        • Power from 24VDC power pack (included) or from remote DM Lite transmitter or DMPS Lite switcher
        1. For DM Lite connections, use Crestron DM-CBL-8G, Crestron DM‑CBL‑ULTRA, or third-party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Cables are sold separately.
        2. 4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.
        3. When a surface-mountable DM Lite receiver is paired with a surface-mountable DM Lite transmitter, either the power pack included with the receiver or the transmitter can be used to power both devices. A power pack must not be connected to both devices simultaneously.

          When a surface-mountable DM Lite receiver is paired with a wall plate DM Lite transmitter, the power pack included with the receiver must be used to power both devices.

          When a DM Lite receiver is paired with an HD-PS622, HD-PS621, HD-PS402, or HD-PS401 DMPS Lite switcher, the switcher provides power to the DM Lite receiver. The DM Lite receiver must not be connected to the included power pack.
        4.  The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are sold separately.
        5. Examples of supported DM Lite 4K60 4:4:4 transmitters are the HD‑TX‑4KZ‑101, HD‑TX‑4KZ‑111, HD‑TXA‑4KZ‑101, HD‑TXC‑4KZ‑101, and HD‑TXCA‑4KZ‑101. Supported DM Lite 4K60 4:2:0 transmitters are the HD‑TX‑101‑C‑E, HD‑TXC‑101‑C‑E, HD‑TX‑301‑C‑E, HD‑TX‑101‑C‑1G‑E, HD‑TXC‑101‑C‑1G‑E, and HD‑TX‑201‑C‑2G‑E. Supported DMPS Lite switchers are the HD‑PS622, HD‑PS621, HD‑PS402, and HD‑PS401.

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or contact us for additional information by visiting www.crestron.com/contact/our-locations for your local contact.

        This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open-source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, .AV Framework, DM Lite, and DMPS Lite are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, Dolby Digital, and Dolby Vision are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. Intertek and the Intertek logo are either trademarks or registered trademarks of Intertek Group in the United States and/or other countries. TOSLINK is either a trademark or registered trademark of Toshiba Electronics Devices & Storage Corporation in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2022 Crestron Electronics, Inc.

         
        4K HDMI HDCP 2.3
        Video
        Input Signal Type DM Lite® with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support2
        Output Signal Type HDMI® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support (DVI compatible)4
        Copy Protection HDCP 2.3
        Resolutions Common resolutions are listed in the following table.
        Scan Type Resolution Frame Rate Color Sampling Color Depth
        Progressive 4096x2160 DCI 4K & 3840x2160 4K UHD 24 Hz 4:4:4 12 bit
        30 Hz 4:4:4 12 bit
        60 Hz 4:2:2 12 bit
        60 Hz 4:4:4 8 bit
        2560x1600 WQXGA 60 Hz 4:4:4 8 bit
        1920x1080 FHD 1080p 60 Hz 4:4:4 12 bit
        Interlaced 1920x1080 HD 1080i 30 Hz 4:4:4 12 bit
        Note: The maximum supported resolution is 4K60 with 4:4:4 color sampling. Custom resolutions are supported at pixel clock rates up to 600 MHz.
        Audio
        Input Signal Type DM Lite, digital S/PDIF optical (TOSLINK® connector)
        Output Signal Type HDMI, analog stereo
        Digital Formats, HDMI Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
        Digital Formats, S/PDIF Dolby Digital, Dolby Digital EX, DTS, DTS‑ES, LPCM up to 6 channels
        Analog Format Stereo 2-channel
        Digital-to-Analog Conversion 24-bit 48 kHz
        Analog Performance Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
        S/N Ratio: >95 dB 20 Hz to 20 kHz A‑weighted;
        THD+N: <0.005% @ 1 kHz;
        Stereo Separation: ≤80 dB
        Communications
        HDMI HDCP 2.3, EDID, CEC pass-through
        DM Lite HDCP 2.3, EDID pass-through
        RS-232 2-way serial pass-through up to 115.2k baud (TD/RD only)
        IR Bidirectional IR signal pass-through up to 60 kHz
        Connectors
        IR IN/OUT (1) 4-pin 3.5 mm detachable terminal block;
        Comprised of (1) IR input port and (1) IR output port;
        IR IN is for connection from a Crestron IR control port or other IR signal source and passes the IR input signal to the IR OUT port on the DM Lite transmitter;
        IR OUT is for connection to an IR emitter (IRP2, sold separately) and transmits the IR signal from the IR IN port on the DM Lite transmitter;
        Supports IR up to 60 kHz
        COM (1) 3-pin 3.5 mm detachable terminal block;
        Bidirectional RS-232 port;
        Passes RS-232 TD/RD data to/from the COM port on a DM Lite transmitter;
        Supports up to 115.2k baud
        HDMI OUT (1) HDMI Type A connector, female;
        HDMI digital video/audio output;
        DVI compatible4
        DM LITE IN (1) 8‑pin RJ‑45 yellow connector, female, shielded;
        DM Lite input port for connection to the DM Lite output port of a DM Lite transmitter or DMPS Lite™ switcher1, 5
        24V 1.25A (1) 2.1 x 5.5 mm DC power connector;
        24VDC power input;
        PW-2420RU power pack included3
        OPTICAL IN (1) JIS F05 female (TOSLINK) optical fiber connector;
        S/PDIF optical digital audio input
        AUDIO OUT (1) 5-pin 3.5 mm detachable terminal block;
        Balanced/unbalanced stereo line-level audio output;
        Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
        Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
        Controls and Indicators
        LINK (1) Green LED, indicates that a DM Lite link is established.

        PWR

        		 (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.
        HDMI OUT (1) Green LED, indicates that the device is transmitting an HDMI signal
        DM LITE IN (2) LEDs on RJ 45 connector. Green indicates that a DM Lite link is established.
        Flashing amber indicates non-HDCP video, and solid amber indicates HDCP video.
        Power
        Power Pack (Included) Input: 100-240VAC
        Output: 24VDC 2.5A
        Model: PW-2420RU3
        Environmental
        Temperature 32° to 104°F (0° to 40°C)
        Humidity 20% to 90% RH (non-condensing)
        Enclosure
        Chassis Metal, black finish, vented sides, 2 mounting brackets included
        Mounting Freestanding, surface mountable, or attachment to a single rack rail
        Dimensions
        Height 4.13 in. (105 mm)
        Width 4.18 in. (106 mm)
        Depth 1.08 in. (27 mm)
        Weight
        11.92 oz (338 g)
        Compliance
        Regulatory Model: M202047002
        Intertek® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device
        Maximum DM Lite Transmission Distance
        Resolution Frame Rate (Hz) Color Sampling Color Depth Cable Type1
        DM-CBL-ULTRA DM® Ultra Cable DM-CBL-8G DM 8G® Cable or CAT5e (UTP) or Higher
        1920x1080 HD 1080i 30 4:4:4 12 bit 230 ft (70 m) 195 ft (60 m)
        1920x1080 FHD 1080p 60 4:4:4 8, 12 bit
        1600x1200 UXGA 60 4:4:4 8, 12 bit
        2048x1080 DCI 2K 60 4:4:4 8, 12 bit
        1920x1200 WUXGA 60 4:4:4 8, 12 bit
        2048x1152 QWXGA 60 4:4:4 8, 12 bit
        2560x1080 UWFHD 60 4:4:4 8 bit
        2560x1440 WQHD Reduced Blanking 60 4:4:4 8 bit
        2560x1600 WQXGA Reduced Blanking 60 4:4:4 8 bit
        2048x1152 QWXGA 60 4:4:4 12 bit
        3840x2160 4K UHD and 4096x2160 DCI 4K 30 4:2:2 12 bit
        30 4:4:4 8 bit
        60 4:2:0 8 bit
        3840x2160 4K UHD and 4096x2160 DCI 4K 30 4:4:4 12 bit 130 ft (40 m) 100 ft (30 m)
        60 4:2:0 12 bit
        60 4:2:2 12 bit
        60 4:4:4 8 bit
        Click here to search product certificates.
        1. For DM Lite connections, use Crestron DM-CBL-8G, Crestron DM‑CBL‑ULTRA, or third-party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Cables are sold separately.
        2. 4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.
        3. When a surface-mountable DM Lite receiver is paired with a surface-mountable DM Lite transmitter, either the power pack included with the receiver or the transmitter can be used to power both devices. A power pack must not be connected to both devices simultaneously.

          When a surface-mountable DM Lite receiver is paired with a wall plate DM Lite transmitter, the power pack included with the receiver must be used to power both devices.

          When a DM Lite receiver is paired with an HD-PS622, HD-PS621, HD-PS402, or HD-PS401 DMPS Lite switcher, the switcher provides power to the DM Lite receiver. The DM Lite receiver must not be connected to the included power pack.
        4.  The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are sold separately.
        5. Examples of supported DM Lite 4K60 4:4:4 transmitters are the HD‑TX‑4KZ‑101, HD‑TX‑4KZ‑111, HD‑TXA‑4KZ‑101, HD‑TXC‑4KZ‑101, and HD‑TXCA‑4KZ‑101. Supported DM Lite 4K60 4:2:0 transmitters are the HD‑TX‑101‑C‑E, HD‑TXC‑101‑C‑E, HD‑TX‑301‑C‑E, HD‑TX‑101‑C‑1G‑E, HD‑TXC‑101‑C‑1G‑E, and HD‑TX‑201‑C‑2G‑E. Supported DMPS Lite switchers are the HD‑PS622, HD‑PS621, HD‑PS402, and HD‑PS401.

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or contact us for additional information by visiting www.crestron.com/contact/our-locations for your local contact.

        This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open-source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, .AV Framework, DM Lite, and DMPS Lite are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, Dolby Digital, and Dolby Vision are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. Intertek and the Intertek logo are either trademarks or registered trademarks of Intertek Group in the United States and/or other countries. TOSLINK is either a trademark or registered trademark of Toshiba Electronics Devices & Storage Corporation in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2022 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.