Online Help

Products

    Pages

        Master Photo: USB-EXT-2-REMOTE-1G-W with Faceplate (sold separately)
        Add to Favorites

        USB-EXT-2-REMOTE-1G-W

        USB over Category Cable Extender Wall Plate, Remote, White

        Extends any USB 1.1 or 2.0 device up to 330 ft (100 m) point-to-point over one CAT5e (or better) shielded twisted pair cable. Mounts to a 1-gang electrical box.

        Extends any USB 1.1 or 2.0 device up to 330 ft (100 m) point-to-point over one CAT5e (or better) unshielded twisted pair cable.

        Have a question?
        Add to a Project
        Find a Dealer

        The Crestron® USB over Category Cable Extender Wall Plates  (USB‑EXT‑2‑LOCAL‑1G and USB‑EXT‑2-REMOTE‑1G) deliver reliable, high‑speed USB signal extension for USB 1.1 and 2.0 devices in a conference room, classroom, auditorium, command center, medical facility, public space, or residence. Without requiring any special configuration or drivers, the USB extenders enable wire runs up to 330 ft (100 m) over a single CAT5e (or better) shielded twisted-pair (STP) cable. The USB extenders support most USB device types and are plug‑and‑play compatible with computers running Windows®, macOS®, and Linux® operating systems.

        Two types of wall plate USB extenders are available:

        • USB‑EXT‑2‑REMOTE‑1G - Provides connectivity for up to two USB devices (keyboards, whiteboards, mobile devices, etc.) at one location
        • USB‑EXT‑2‑LOCAL‑1G - Provides connectivity for a single USB host (computer, media server, codec, etc.)

        Linking the two extenders requires one run of CAT5e shielded twisted-pair cable.2 Both extenders are powered by a single 100-240 VAC power supply, which can be connected at either end to an AC power receptacle.3 The USB‑EXT‑2‑LOCAL‑1G and USB‑EXT‑2‑REMOTE‑1G mount in an unobstructed North American 1-gang electrical box and  are also compatible with the USB over Twisted Pair Extender (USB‑EXT‑2).

        Note: The USB‑EXT‑2‑LOCAL‑1G and USB‑EXT‑2‑REMOTE‑1G are simple point-to-point USB signal extenders. They do not switch or route USB signals, and do not connect to a network. For KVM and other applications routing USB signals over an Ethernet network, please refer to the USB over Category Cable Extender Wall Plates (USB‑NX2‑LOCAL‑1G and USB‑NX2‑REMOTE‑1G) or the USB over Ethernet Extenders with Routing (USB‑EXT‑DM‑LOCAL and USB‑EXT‑DM‑REMOTE).2

         
        Key Features
        • Provide reliable, high-speed USB signal extension for most USB 1.1 or 2.0 devices1
        • Compatible with Crestron® USB over Twisted Pair Extender (USB‑EXT‑2)
        • Extend USB signals up to 330 ft (100 m) over CAT5e (or better) twisted-pair cable2
        • 100-240 VAC power supply (included)
        • Enable transparent point-to-point USB extension without any configuration or programming
        • Mount in an unobstructed North American 1-gang electrical box (not included)
        • Plug-and-play compatible with most types of USB 1.1 and 2.0 devices and hosts1
        • No drivers required with Windows®, macOS®, or Linux® operating systems1
        • Transport USB over CAT5e at speeds up to 480 Mbps
        • Mass Storage Acceleration maximizes USB 2.0 bulk transfer speeds
        • Expandable using up to 4 USB hubs (not included)
        •  provides 2 USB Type A ports
        1. The USB extender is engineered to deliver maximum compatibility with the widest possible range of devices. Crestron does not guarantee that all USB devices or hosts are compatible with the USB extender. Certain USB devices may require additional driver installation if not directly supported by the computer’s operating system.
        2. For the LINK connection between the Local and Remote extenders, as a minimum, use high quality, solid core CAT5e (or better) unshielded twisted pair (UTP) cable. To comply with the European Directive (CE), Crestron® recommends using high-quality, solid core CAT5e (or better) shielded twisted pair (STP) cable. If connecting either extender through a wall jack, a stranded patch cord may be used. The maximum aggregate cable length is 330 ft (100 m) between units. The minimum cable length is 6 ft (1.8 m). Do not connect the LINK ports to an Ethernet LAN or any other network or device, including the  USB‑EXT‑DM‑REMOTE, USB‑EXT‑DM‑LOCAL, USB‑NX2‑REMOTE‑1G, USB‑NX2‑LOCAL‑1G.
        3. The power supply must be connected to either the Local or Remote extender, not both. Power is passed to the secondary extender via the LINK connection. A ferrite bead is provided to reduce or prevent EMI (electromagnetic interference). Crestron recommends installing this ferrite bead on the included 24 VDC power supply cable close to the device.When using a power source other than PoE, Crestron recommends installing this ferrite bead on the power supply cable close to the device.

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

        This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. macOS is either a trademark or registered trademark of Apple, Inc. in the United States and/or other countries. Linux is either a trademark or a registered trademark of Linus Torvalds in the United States and/or other countries. Windows is either a trademark or registered trademark of Microsoft Corporation in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2020 Crestron Electronics, Inc.

         
        Communications
        LINK USB extension up to 330 ft (100 m) over solid-core CAT5e (or better) shielded twisted pair (STP) cable2
        USB Device Support USB 1.0/1.1 and 2.0 compatible including mass storage and isochronous devices1
        USB Hub Support Any signal chain may include up to 4 USB hubs plus one USB-EXT-2-LOCAL-1G and one USB-EXT-2-REMOTE-1G1
        Maximum USB Devices 30 USB devices, or 4 USB hubs with 26 USB devices
        Host Computer OS Support Windows®, macOS®, and Linux® operating systems
        USB Throughput USB 2.0 up to 480 Mbps, USB 1.1 up to 12 Mbps
        Connectors – Local endpoint
        24 V 0.75A (1) 2-pin 3.5 mm detachable terminal block;
        24 VDC power input;
        PW-2407WUL power supply included3,4
        CONFIG For factory use only
        LINK Connects directly to a Remote
        extender2
        USB (1) USB Type B connector, female;
        USB 2.0 device port for connection to the USB host computer, media server, game console, annotator, codec, etc.
        Connectors – Remote endpoint
        24 V 0.75A (1) 2-pin 3.5 mm detachable terminal block;
        24 VDC power input;
        PW-2407WUL power supply included3
        CONFIG For factory use only
        LINK (1) 8-pin RJ45 connector, female;
        Connects to Link port on the Local extender2
        USB (2) USB Type A connectors, female; USB 2.0 host ports for connection of USB devices such as mice, keyboards, and other USB devices1
        Indicators – Local endpoint
        ACT (1) Amber LED, indicates data activity on the LINK interface
        HOST (1) Green LED, indicates a valid connection to the USB host
        LINK (1) Green LED, indicates a valid LINK connection to the Remote extender
        MODE (1) Recessed pushbutton (for factory use only)
        PWR (1) Blue LED, indicates operating power is supplied via the local power supply or the LINK connection3
        Indicators – Remote endpoint
        ACT (1) Amber LED, indicates data activity on the LINK interface
        HOST (1) Green LED, indicates a valid connection to the USB host at the Local extender
        LINK (1) Green LED, indicates a valid LINK connection to the Local extender
        MODE (1) Recessed pushbutton (for factory use only)
        PWR (1) Blue LED, indicates operating power is supplied via the local power supply or the LINK connection3
        Power
        USB‑EXT‑2‑LOCAL‑1G USB powered via the USB host interface3
        An optional ferrite bead is provided to reduce or prevent EMI (electromagnetic interference).3
        USB‑EXT‑2‑REMOTE‑1G Input: 100-240 VAC, 50/60 Hz;
        Output: 0.75 A @ 24 VDC;
        Model: PW-2407WUL;3
        An optional ferrite bead is provided to reduce or prevent EMI (electromagnetic interference).3
        Environmental
        Temperature 32° to 122° F (0° to 50° C)
        Humidity 20% to 80% RH (non-condensing)
        Enclosure
        Construction Metal, black finish with white or black polycarbonate label overlay
        Flush Wall Mount Mounts in an unobstructed North American 1-gang electrical box (not included);
        Minimum mounting depth of 2 in. (51 mm) required;
        FP-G1 series decorator style faceplate (not included)
        Dimensions
        Height 4.12 in. (105 mm)
        Width 1.72 in. (44 mm)
        Depth 1.95 in. (50 mm)
        Compliance
        IC, FCC Part 15 Class B digital device
        Click here to search product certificates.
        1. The USB extender is engineered to deliver maximum compatibility with the widest possible range of devices. Crestron does not guarantee that all USB devices or hosts are compatible with the USB extender. Certain USB devices may require additional driver installation if not directly supported by the computer’s operating system.
        2. For the LINK connection between the Local and Remote extenders, as a minimum, use high quality, solid core CAT5e (or better) unshielded twisted pair (UTP) cable. To comply with the European Directive (CE), Crestron® recommends using high-quality, solid core CAT5e (or better) shielded twisted pair (STP) cable. If connecting either extender through a wall jack, a stranded patch cord may be used. The maximum aggregate cable length is 330 ft (100 m) between units. The minimum cable length is 6 ft (1.8 m). Do not connect the LINK ports to an Ethernet LAN or any other network or device, including the  USB‑EXT‑DM‑REMOTE, USB‑EXT‑DM‑LOCAL, USB‑NX2‑REMOTE‑1G, USB‑NX2‑LOCAL‑1G.
        3. The power supply must be connected to either the Local or Remote extender, not both. Power is passed to the secondary extender via the LINK connection. A ferrite bead is provided to reduce or prevent EMI (electromagnetic interference). Crestron recommends installing this ferrite bead on the included 24 VDC power supply cable close to the device.When using a power source other than PoE, Crestron recommends installing this ferrite bead on the power supply cable close to the device.

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

        This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. macOS is either a trademark or registered trademark of Apple, Inc. in the United States and/or other countries. Linux is either a trademark or a registered trademark of Linus Torvalds in the United States and/or other countries. Windows is either a trademark or registered trademark of Microsoft Corporation in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2020 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.